Cisco: Manually Registering an ATA

Cisco

Cisco: Manually Registering an ATA

Scope:

The following steps will show you how to manually register a Cisco ATA. All examples were made using a Cisco SPA232D and the portal appearance may vary from device to device.

Requirements:

Obtain SIP Credentials

  1. Log in to the Manager Portal
  2. Navigate to Phones
    1. NOTE: Office Managers can navigate to Users > select the user > Phones
  3. Select Phone Info for the ATA you wish to register.
    1. NOTE: You will only see the information if the phone model is set to Manual or Softphone
  4. Take note of the listed information.
  5. Click Cancel when you are finished

Manually Register the ATA

Note:

The default LAN IP Address in 192.168.15.1. You will use this to log into the web interface.

  1. Using any web browser navigate to 192.168.15.1. The default username and password will be admin/admin.
  2. Click on Admin Login > Advanced
  3. Click on Voice > Line 1
  4. Complete the following, leaving all other fields as default
    • Proxy: Enter the Domain / Proxy
    • Outbound Proxy: Enter the Outbound Proxy (exclude the 5060)
    • Use Outbound Proxy: yes
    • Register: yes
    • Display Name: User’s Name
    • User ID: Username
    • Use Auth ID: yes
    • Auth ID: Username
    • Password: Password
  5. Click “Submit”

For more info, you can review the manual for a Cisco SPA232D here: https://www.cisco.com/c/dam/en/us/td/docs/voice%5Fip%5Fcomm/csbpvga/spa100-200/quick%5Fstart/SPA232D%5FQSG-en%5F78-21580-01.pdf

ata cisco