Grandstream GDS3710 to Yealink T58 Video Call Setup

Scope:

This document will help you adjust the settings on the GDS3710 with firmware XXXX to allow audio and video during a call on your hosted PBX service.

Requirements:

• Access to the phone’s GUI
• SIP Credentials - Find how to get them here
• GDS Firmware: 1.0.5.2
• Yealink Firmware 58.83.0.56

Configure GDS3710 via Web GUI

1. Log in to GDS3710 Web GUI
   NOTE: Username is admin, default password is printed on the back panel of the device
2. Complete the following fields using the SIP credentials from the Manager Portal
   • Account Name: Name of the device
   • SIP Server: Enter the Domain/Proxy
   • Outbound Proxy: sbc.ucaasnetwork.com
   • SIP User ID: Enter the Username
   • Authentication ID: Enter the Username
   • Password: Enter the Password
     
3. Go to Door System Settings
   1. Call Mode: SIP Number
   2. Doorbell Mode: Call Doorbell Number
   3. Door Bell Call Mode: Serial Hunting
   4. Number Called When Door Bell Pressed: Extension of the Yealink phone
      
4. Go to SIP Setting > SIP Advanced Settings > Enable SIP Proxy Compatibility Mode

setup [video call](https://docs.servantvoice.cloud/articles/hardware-software/grandstream-gds3710-to-yealink-t58-video-call-setup/contact-us##search%5Fquery=video call)