V-Tech: Manual Provisioning

Scope

Intended Audience: Clients and T1 or higher

The following article outlines how to remotely provision a V-Tech device.

Requirements

• Admin login to V-Tech Phone
• Device must be added as a SIP Phone in the Manager Portal. Add a SIP Phone
• Global Username and Password provided by Support.

Find Yealink Phone IP Address

1. From the V-Tech Phone select Menu
2. Select Status
3. Select Network
4. Take note of the IP address for the next steps

Configure V-Tech Phone

1. Using any web browser navigate to the IP address from the above step
2. Log in. The default credentials are admin/admin
3. Click on Servicing
   
4. At the left menu click on Provisioning
   
5. In Server URL enter the provisioning URL for your account, followed by the Global One Time Password and Username or the per device password

Server URL: http://ndp.ucaasnetwork.com/cfg

1. Once that is done, Click Save at the bottom of the screen.
   
2. Once the page refreshes at the left menu click on Reboot and then click on the reboot button. Your phone will download the config and reboot at least once. It may reboot more if it needs to update the firmware.
   

Troubleshooting

If your phone does not provision with the DNS name try using http://129.213.10.212/cfg

[manual provisioning](https://docs.servantvoice.cloud/articles/provisioning/v-tech-manual-provisioning/contact-us##search%5Fquery=manual provisioning) v-tech