How to do Local Conferencing with Yealink Supported Devices

Yealink

How to do Local Conferencing with Yealink Supported Devices

Scope:

The following article will show you how to start a local conferencing with supported Yealink Phones

Supported Yealink Devices

The table below is the supported Yealink devices for local conferencing with 3 or more parties. We recommend verifying the phone is on the latest manufacturer firmware version before following these steps

Model Number of Participants
CP920/T42U/T43U/T53/T53W 5
T46U/T48U/T54W/T57W 10

How to Start Local Conferencing

  1. Place a call or while on an active call
  2. Once the call is active, Press the Conference softkey on the screen
  3. Dial another number ( extension or off-net )
  4. Once the call is connected, press the Conference softkey on the screen again
  5. At this point, you should have 3 parties on the call including yourself. You may add another party to this conference.
  6. On the phone screen, you’ll notice that the Conference softkey button is now on the left side of the screen. Press the button, then dial another number (ext/off-net).
  7. Once the call is connected, hit the Conference softkey button again.
  8. You may repeat the steps as needed to add more parties to the call.

Managing Local Conference

[yealink devices](https://docs.servantvoice.cloud/articles/yealink/how-to-do-local-conferencing-with-yealink-supported-devices/contact-us##search%5Fquery=yealink devices) [local conferencing](https://docs.servantvoice.cloud/articles/yealink/how-to-do-local-conferencing-with-yealink-supported-devices/contact-us##search%5Fquery=local conferencing)